Oil Filtration Equipment and Filters

TekTrade Baltic is an official distributor of CJC™ Oil Filtration Equipment and filter inserts in the Baltic countries. 

CJC™ Oil Filtration Equipments are off-line oil filters. They are installed parallel with oil system tank to filter and maintain oil in tank. Properly filtrated oil is pumped from tank into the oil system. Oil system is maintained and clean when using CJC™ Oil Filtration Equipment.

Look at the scheme below:

Oil system Off line

Off-line Filtration


Products are divided according to requirements: 

CJC™ Fine Filter – Oil Filtration Equipment to filter oils in hydraulic systems and gear boxes.

  • Mechanical particles until absolute 3 microns of filtration degree, are filtered
  • Free water absorbs into filter insert
  • By-products of oxidation process are adsorbed into filter insert
CJC™ Fine Filter

CJC™ Fine Filter

CJC™ Filter-Separator – Oil Filtration Equipment to maintain steam turbine oil systems and marine thruster oil systems and filter marine diesel fuel. Is meant to install for oil systems in case of continuous water leakage or when water leakage is a risk factor.

  • Mechanical particles until absolute 3 microns of filtration degree are filtered
  • Free water is separated from oil
  • By-products of oxidation process are adsorbed into filter insert
CJC™ Filter-Separator

CJC™ Filter-Separator

CJC™ Desorber – water separating device that removes water also from oils with very high viscosity and breaks water/oil emulsions.

CJC™ Desorber

CJC™ Desorber

CJC™ Ion-Exchange / Acid Removal Filter – a device for filtering transformer oils and turbine control system oils from mechanical particles and lowering oils acidity level. During filtration process there are used acid/ion neutralizing inserts combined with standard CJC high dirt-holding capacity inserts.

CJC™ Ion-Exchange / Acid Removal Filter

CJC™ Ion-Exchange / Acid Removal Filter

CJC™ Filter for Heat Transfer Oil / High Pressure Filter – a device for filtrating heat transfer oils and other hot oils from dirt and by-products caused by oil agening process.

CJC™ Filter for Heat Transfer Oil / High Pressure Filter

CJC™ Filter for Heat Transfer Oil / High Pressure Filter

CJC™ VRU (Varnish Removal Unit) – a device for removing soluble varnish from oils. Mainly used with lubricating systems of gas and steam turbines. 
 

CJC™ VRU (Varnish Removal Unit)

CJC™ VRU (Varnish Removal Unit)

CJC™ Filter Inserts have large dirt holding capacity. For example standard insert sized 27/27cm collects dirt up to 4 liters.
Basic materials in producing filter inserts are cellulose and cotton. Filter insert types like A, B, BG, BLA, BLAT, F, U, Vri are produced according to application. 
All CJC™ Filter Inserts have an oil filtration degree of 3 micron absolute.
All filter inserts are available from stock.

CJC™ Õlipuhastusseadmete filterelemendid

CJC™ Filter Inserts

CJC™ Õlipuhastusseadmete filterelemendid

CJC™ Filter Inserts Modular System



CJC™ Catalogue - Clean Oil Guide
CJC™ Catalogue - Mining Industry
CJC™ Catalogue - Wind Energy
CJC™ Catalogue - Power Industry
CJC™ Catalogue - Marine Industry

CJC™ Enquiry Sheet


“In-line” Filter Inserts

We offer in-line oil filters in co-operation with several filter inserts producers like Parker, Donaldson, SF-Filter and others.

"In-line" filtrid

"In-line" Filter Cartridge